[. . . ] PN-K321H LCD MONITOR OPERATION MANUAL Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. [. . . ] When clamping the AC adapter cable, take care not to stress the terminal of the AC adapter cable. • Landscape Operation buttons • Portrait Cable clamp attachment Operation buttons Cable clamp attachment AC adapter cable (Supplied) Caution AC adapter cable (Supplied) • Do not fasten the supplied AC adapter to the monitor or other equipment. 13 E Binding Cables nFastening the cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamps to the attachment parts on the back of the monitor and the stand, and bind the cables. Cable Cable clamp attachment Cable clamp Cable clamp (small) Cable clamp (large) Cable clamp attachment Cable Cable clamp attachment Cable nStoring the cables • Landscape The cables connected to the rear of the monitor can be bound using the cable clamp on the stand. • Portrait Cable clamp (large) Cable clamp attachment Cable Caution • Do not forcibly bend or apply force to the cables. Risk of wire breakage or other damage. E 14 Turning Power On/Off Caution • Turn on the monitor first before turning on the PC or playback device. Turning power on/off Press the power button ( ) to turn the power ON/OFF. Power button ( ) Turning on the main power Power LED Power lamp status Main power switch Green lit Off Orange lit Caution Caution Status of the monitor Power on Power off (Standby mode) Input signal waiting mode • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • When switching the main power switch or the power button ( ) off and back on, always wait for at least 5 seconds. • For a complete electrical disconnection, pull out the main plug. • When switching the main power switch or the power button ( ) off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. TIPS • When the main power switch is off, the monitor cannot be turned on. • If the monitor is in the input signal standby mode and you press the power button ( ), the monitor enters standby mode. 15 E Basic Operation 1 2 3 4 5 6 7 6. (See page 18. ) Settings can be entered when the menu screen is displayed. [RETURN] button In a menu screen, returns the cursor to the previous screen. TIPS • If you are using the vertical sticker (Operation buttons), substitute the following for the button displays. - Brightness adjustment button ( / ) → Brightness adjustment button ( / ) - [VOL+/ ]/[VOL-/ ] button ]/[VOL-/ ] button → [VOL+/ • If you are using the horizontal sticker (Operation buttons), substitute the following for the button displays. - Brightness adjustment button ( / ) → Brightness adjustment button ( / ) - [VOL+/ ]/[VOL-/ ] button ] button → [ / VOL+]/[VOL-/ 1. Brightness adjustment button ( The brightness menu appears. BRIGHT 15 / ) Adjust the brightness with the brightness adjustment button ( / ). *  you do not press any buttons for about 4 seconds, the If BRIGHT menu automatically disappears. Move the cursor left or right in the menu screen, and increase or decrease the setting. *  The cursor moves right when the brightness adjustment button ( ) is pressed, and left when the brightness adjustment button ( ) is pressed. [VOL+/ The volume menu appears. VOLUME 15 Adjust the volume with the [VOL+/ ]/[VOL-/ ] buttons. *  you do not press any buttons for about 4 seconds, the If VOLUME menu automatically disappears. [. . . ] * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. nPower management This monitor conforms to VESA DisplayPort power management. nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. [. . . ]